The seven hard drive rack is completely removable and that makes it winner since it makes installing your hard drives so much easier. To remove it all you need do is remove a thumbscrews at the top and bottom of the rack and then push down the release tab and pull out to free it.

With the drive rack removed you can see the front mounted fan easier and you realize how much air is blown directly across the the hard drives when the rack is in place and filled to capacity. This is also a great picture to look at the various edges of the case and you can see how they have been rolled over at the factory and thereby do away with cut hands from reaching into the case.

Here we can see the 120mm fan located at the rear of the case and clear fan you see if the top mounted 200 x 200mm fan. These fans will do a great job of helping this case stay cool.

Here is perhaps one of the coolest features about this case, there is no need to have a wire hanging from the door anymore to power the fan mounted on the side panel of the case, thanks to the plug-in power connector that is permanently mounted to the case.