Titan has tried its hand at water cooling in the past and I
would say that the units that they released did on average a
pretty decent job if you used them as they were intended to be
used. Titan never made any claims that their systems were
made for the overclocker or hardcore enthusiast but more for the
person wanting to run a system with a bit less noise.
That is why the TWC-88 Robela Water Case
could be considered a monumental decision on Titan part, for to
release a case which incorporate the entire water cooling system
in it is quite amazing. The design is new and refreshing to see and I think
it something you will enjoy reading about so lets get started.
12CM Fan
9CM Fan
Fan Dimension
120 x 120 x 25 mm
90 x 90 x 25 mm
Rated Voltage
6 ~ 12V DC
12V DC
Rated Current
0.09 ~ 0.25 A
0.09 A
Power Consumption
0.54 ~ 3.0 W
1.08 W
Rated Speed
1000 ~ 1800 ± 10%RPM
2000 ± 10%RPM
Airflow
39.5 ~ 71.09 CFM
34.5 CFM
Static Pressure
< 1.23 ~ 2.22 mmH2O
1.66 mmH2O
Noise Level
< 20 ~ 34 dBA
< 24 dBA
No. of Pole
4 Pole
Bearing Type
Sleeve / One Ball / Two Ball / Z-AXIS
Life Time
25,000 / 35,000 / 50,000 / 60,000 Hours
Water
pump motor
Rated Voltage
12V DC
Rated Current In Water
0.25 A
Power Consumption
3.0 W
Rated Speed In Water
2000 ± 10%RPM
High In Water
> 1000 mm
No. of Pole
4 Pole
I'm not sure if the female warrior on the
front of the shipping carton is Robela, but if it is I would
like to meet her and her sword sometime. Titan continues
with their almost medieval design artwork on this product, it
has become a trademark of Titan to given each of their products
a proper name and then to design a character to go with that
name. The characters are all very well done and rank
right up there with some of the top poster art work I have seen
in the past. So for design originality I would have to give
Titan high marks for their presentation of this product.
Retail Package Front
Retail Package Side
Deluxe water cooling chassis
Excellent heat dissipation for CPU, GPU and inside the
case
CPU : compatible with Intel P3, P4 (Socket 478/775), AMD
K7, K8 (Socket 754/939/940)
GPU : compatible with most ATI and NVIDIA VGA cards
Easy installation
Super cooling radiator design with 12cm x 2 silent fans
to provide ultimate heat dissipation
Cool light multi-function LCD panel to monitor the water
level, water pump status, fan speed, noise level and
temperature
Alarm for pump failure, fan failure, low water level,
and over temperature
Compatible with Micro ATX, Standard ATX and Extended ATX
(Dual CPU) motherboards
Including tool-free 5.25” and 3.5” device brackets and
tool-free PCI slots
