Introduction
As the speeds of our computers increase
so does the heat generated by that the component insides
these systems, it has now become quite evident that
the old air and fin heatsink systems are not going to be
able to cope with these high temperature demands. Where water
cooling used to be though of as means of cooling only used
by the truly brave enthusiasts, now we are seeing companies
such as Alienware offering water cooling as stock equipment
on their systems.
Having been a fan of Corsair memory for
more years than I can recall I was quite anxious to get my
hands on new Corsair Water Cooling Kit was soon as it was
released to the public but due to some minor glitches I was
forced to wait for some additional weeks before trying the
system out.
|
Retail Carton Front |
|
Retail Carton Rear |
 |
|
 |
The Corsair Water Cooling Kit's retail
carton follows suite using the same color scheme as all
Corsair products with the black highlights and green accents
used on the carton. The front of the carton has six small
inset pictures that illustrate the main parts of the water
cooling kit. The rear of the carton has eight larger
sized pictures showing the main parts of the water cooling
kit.
The design may be simple but it gets the
job done and that is what makes it so effective. Overall I
would give the packaging and artwork on the packaging..
Score:
9
CWC100-1000 for Socket 478 and K8
Quantity Description
1 - CPU water-block for Intel Pentium 4
(Socket 478) processors and AMD‚ K8 Athlon 64/FX processors
(Socket 754, 939, and 940)
2 - feet of tubing pre-installed
1 - Socket 478 hold down bracket (bag labeled SP4)
1 - Socket 754/939/940 hold down bracket (bag labeled SK8)
1 - 120mm radiator
1 - 120mm fan
1 - “RadBox” external radiator mounting kit
1 - 6 foot length of inch ID clear vinyl tubing
1 - 225ml of environmentally safe coolant
1 - DDC 12 Volt DC industrial pump
1 - Reservoir
6 - Nylon hose clamps
1 Fan guard
1 1g tube thermal compound
1 PCI bracket with power cable
1 Pump mounting pad (foam)
CWC100-1000 for Socket 775 and K7
Quantity Description
1 - CPU water-block stepped for Intel Pentium 4 (Socket 775)
processors and AMD K7 (Socket 462)
2 - feet of tubing pre-installed
1 - Socket 775 hold down bracket (bag labeled S775)
1 - Socket 462 hold down bracket (bag labeled SK7)
1 - 120mm radiator
1 - 120mm fan
1 - “RadBox” external radiator mounting kit
1 - 6 foot length of inch ID clear vinyl tubing
1 - 225ml of environmentally safe coolant
1 - DDC 12 Volt DC industrial pump
1 - Reservoir
6 Nylon hose clamps
1 Fan guard
1 1g tube thermal compound
1 PCI bracket with power cable
1 Pump mounting pad (foam)